Braking a car or truck requires a tremendous amount of force and the faster the vehicle is moving, the more force is required. The most common method of stopping a vehicle used to be the drum brake, a set of shoes that pressed on the inside of the wheel drum. This system is fairly effective and this is one reason that many vehicles still use it for the rear wheels. Brake Installation in Buffalo Grove IL for drum brakes often requires taking each wheel/brake assembly apart.
The more modern vehicles use what is known as disc brakes. This is a set of pads that float over each side of the wheel rotor and press against it when the brake pedal is pushed. Replacing these brakes is often much easier because the brake caliper that holds them in place only uses only a few bolts. One benefit to the use of disc brakes is a faster stopping capability, which is the main reason that so many vehicles use them. One downside to disc brakes is the wear and tear on the rotors. Constant grinding can ruin a rotor and the braking surface may not be thick enough to be turned or smoothed.
Disc Brake Installation in Buffalo Grove IL is not quite as simple as replacing the pads because the mechanic will need to ensure that no air gets into the brake lines. Plus, brake replacement may require rebuilding any weak calipers. This task often requires that every caliper is rebuilt because fixing one will weaken the others and could result in uneven braking motion.
Turning or facing the rotors is equally important because the ridges and grooves that develop will damage the new pads and could cause the driver to lose control if the brake pad suddenly grabs on the rotor. If the damage is minimal, then it may be possible to turn the rotor on the vehicle. This is done with a portable tool that spins the rotor in place. However, replacing the rotor may also be required to avoid the chance of heat fractures. Fractures can result in loss of control or serious front-end problems. Visit the experts at website to learn more about brake repair or installation. You can also connect with them on Facebook.
