There are a lot of things in a car that fall into the “out of sight, out of mind” category, brakes for most people are one of them; that is until there is a problem. The normal indicator of brakes problems is a grinding or squealing noise when you depress the pedal, over and above normal wear what is the most common reason for brake failure?
One of the leading causes of brake failure and the subsequent need for brake service in Fort Wayne IN is crystallization of the pads. This happens when the pads become too hot, harden and lose their effectively in stopping the vehicle. This is something that can happen if the car is subjected to too many panic stops or the driver has the tendency to ride the brake. The brake pad material must be soft enough to hold to the rotating disc, if the material becomes excessively hard the brakes become ineffective.
Signs of brake problems:
* Grinding or squealing noise: This is a common indicator for either worn or glazed brake pads. The noise actually is coming from the built in indicators or sensors which contact the rotor once the pads reach the point where they have to be replaced. This feature on vehicles is an aural indicator that your car needs brake service in Fort Wayne IN. When you first hear these noises get the brakes serviced as soon as possible otherwise there can be added damage to the brake rotors.
* Brake pedal pulsation: This is usually an indication that excessive heat and mechanical wear has caused distortion of the brake rotor. The wear tends to reduce the thickness of the rotor, this causes it to warp; this condition causes the sensation of pulsation of the pedal while you are applying the brakes. The answer is to machine the rotor flat if it is still thick enough or if not, rotor replacement is in order.
* A clicking noise is observed: The pads of disc brakes are held in place by pressure when the caliper closes on the brake rotor, the fit is somewhat loose. During assembly the car is fitted with spring steel devices that stop the movement of the pads which stops the natural clicking noise. Over time this spring steel device can break and when it does the pad begins to vibrate as it is a loose fit, the result is a clicking noise that is apparent when braking.
It is advisable to take your car in for periodic brake service in Fort Wayne IN; expensive repairs can be avoided by keeping your senses honed.
As a car owner the one thing you do not want to happen is for your brakes to fail. To avoid any unpleasant surprises it is recommended that you take your car in for periodic brake service in Fort Wayne IN. You are invited to visit Kruse Automotive Service where all their work is guaranteed. Visit KruseAutomotiveIN.net for more information.
