When a person buys a trailer, a standard piece of equipment is a trailer jack. A trailer jack is a retractable post that supports the trailer when it is detached from a towing vehicle. However, over time, a stock trailer jack may wear out or become damaged. This is one reason Trailer Jacks in North Dakota are made to be replaced.
Tongue Weight Support
What a lot of people fail to realize, especially people who have never owned a trailer, is that if they need to replace a trailer jack it does not have to support the entire weight of the trailer. The wheels of the trailer will support the bulk of the trailer’s weight. The trailer jack will typically only need to carry the tongue weight of the trailer when it is off of the hitch. In most cases, a trailer jack rated at 10 to 15 percent of the weight of the trailer will be all the weight that will need to be supported.
Short Retractable Height
Another thing that needs to be considered is a trailer jack’s retractable height. The reason for this is that, often, the vehicle’s back end can sag once the trailer is attached to it. If the jack isn’t retracted far enough, or if the retractable height isn’t short enough, it can touch or drag on the ground. This is the leading cause of trailer jack damage, especially with very heavy loads.
Model Options
When choosing replacement Trailer Jacks in North Dakota, a trailer owner will have a few model options. The first is the side-mounted jack. These are fairly common and, in most cases, the easiest to replace. An A-frame trailer jack is a stand that connects to the back of the trailer tongue. The last type is a pull-pin, swivel trailer jack.
With so many different factors and options, it may be hard for you to determine the right replacement jack for your needs. That’s why it’s best to speak with the experts at Website Domain. Not only can they help you choose the right trailer jack, you can also purchase that jack from them as well.
Connect with us on Facebook!
