How to Troubleshoot Common Issues With Your High Performance Paint
If you have decided to do some interior improvement projects and have made the decision to invest in some high performance paint, you are choosing a great paint option that is designed to deliver a flawless finish and beautiful color on all types of surfaces. Typically with high performance paint projects you will be using a spray application technique in order to apply the paint.
For some, getting used to this type of application can take some time, but it is usually the fastest solution to applying this type of paint and it is also the best in terms of delivering results. However, even with high performance paint and the best spray gun techniques, there are a few common issues that can arise when using these paints. Understanding what these issues are and how to handle them is important so you can be sure your painting project turns out the way you want it to.
Banding or Striping
If you have noticed that there are bands or stripes along your surface after you have applied a coat of high performance paint, there is no need to panic. Typically you sprayed with the gun too close to the surface or your spray stroke was too slow causing a wet edge. In these situations you will not need to change the pressure settings. Instead, you will want to do quicker lighter passes over the area to blend the stripes together. This striping can sometimes come from too high of air pressure. If it does, you will know. In these situations, you will want to drop the air pressure until under atomized or increase the fluid pressure for more even results.
If you have the wrong color appearing on your wall or the color looks off, then you probably did not prep correctly. You will want to make sure that all sediment is off the bottom of the can and that your material is boxed. Once you have properly prepped a few light passes with the right color will fix the issue.
If you notice blotches with your high performance paint job, then it typically means you either applied too much paint at one time or hovered over a certain area for too long, or you didn’t allow the paint to dry long enough between coats. Either way, you will want to wait until the paint is completely dry and start applying light passes until you achieve the more even look you want.
If you get a dry or gritty spray it typically means there is too much air pressure or not enough fluid pressure in the gun or that the spray gun was too far from the wall. This causes the paint to dry in mid-air. Once you have noticed a dry spray, stop, let it dry and use a fine grit sandpaper to remove the gritty texture.
High Performance Paint – Wolf Gordon is a leading provider of high performance paints. Visit them online at wolf gordon.com to see all of their paint options and to get more information on applying high performance paint properly.